|
| |
If you want to rid your kitchen bin and rubbish bin of food leftovers.
If you want fewer bad smells and flies in you house.
If you want to deter foxes from attacking your dustbin.
If you want to do your bit for the environment and reduce the volume of waste going to landfill by up to 50% and increase the production of soil conditioners.
Then you should fit a Waster Disposal Unit.
Contrary to what you might think a waste disposal unit is an environmental net gain because the very modest amounts of energy and water used to run it are far outweighed by the amount
of methane producing food waste which is now no longer going to landfill. So by using one you not only have a cleaner kitchen environment but you are also helping the environment.
Some councils in England have recognised this and are now starting to encourage the installation of waste disposal units. For example Worcestershire County Council are offering a grant of up
to £80.00 if you fit a waste disposal unit.
In other areas the rubbish collection is being drastically reduced. Starting in October 2006 Tewkesbury Borough Council will only empty the wheelie bins once a fortnight instead of once a week. So
here it makes good sense to install a waste disposal unit, to reduce the amount of waste going in the bin and prevent it starting to putrefy and stink as it will do if left for two weeks. We
recommend "In Sink Erator" and MaxMatic waste disposal units. In Sink Erator is an American company and Maxmatic is an English one. Maxmatic units are more expensive but
carry longer guarantees, up to 10 years.
|
|
|
|
 
|
|
This model offers you these features and benefits:
- .50 HP Dura-Drive® heavy-duty induction motor.
- Galvanized steel shredder ring.
- Stamped stainless steel.
- Stamped stainless steel 360° swivel lugs.
- Engineered resin grind chamber won’t corrode.
- Overload protection.
- Permanently lubricated bearings.
- Quick-Lock® mounting assembly for faster, easier installation.
- Plastic sink stopper never corrodes.
- Standard stainless steel sink flange.
- Jam-Buster® wrench included to free jams.
-
- £60.00 + VAT
- Optional Air Switch £40.00 +VAT
|
|
|
|
|
 
|
|
This model offers you these features and benefits:
- .55 HP Dura-Drive® heavy-duty induction motor.
- Stainless steel shredder ring for increased grinding efficiency.
- Stainless steel rotating shredder ring.
- Cast 360° stainless steel lugs.
- Engineered resin grind chamber won’t corrode.
- Overload protection.
- Permanently lubricated bearings.
- Quick-Lock® mounting assembly for faster, easier installation.
- Plastic sink stopper resists corrosion.
- Standard stainless steel sink flange.
- Jam-Buster® wrench included to free jams.
- Standard Quiet Sound Reduction System.
-
- £134.00 + VAT
- Optional Air Switch £40.00 +VAT
|
|
|
|
|
 
|
|
This model offers you these features and benefits:
- .65 HP Dura-Drive® heavy-duty induction motor.
- Auto-Reverse Grinding System™ for trouble-free operation.
- Stainless steel shredder ring for increased grinding efficiency.
- Stainless steel rotating shredder with bolted connection
for corrosion protection.
- Stamped stainless steel 360° swivel lugs.
- Large engineered resin grind chamber won’t corrode.
- Overload protection.
- Permanently lubricated bearings.
- Quick-Lock® mounting assembly for faster, easier installation.
- One-piece stainless steel sink stopper resists corrosion.
- Polished stainless steel sink flange.
- Jam-Buster® wrench included to free jams.
- Built-in air switch (220-240V, 50Hz Only).
- Quiet Plus Sound Reduction System.
-
- £ 204.00 + VAT
|
|
|
|
|
 
|
|
This model offers you these features and benefits:
- .75 HP Dura-Drive® heavy-duty induction motor.
- Auto-Reverse Grinding System™ for trouble-free operation.
- Stainless steel shredder ring for increased grinding efficiency.
- Stainless steel rotating shredder with bolted connection
for corrosion protection.
- Cast stainless steel 360° swivel lugs, copper-infiltrated.
- Extra-large stainless steel grind chamber for extra durability.
- Overload protection.
- Upper end bell with corrosion shield guards against
caustic action of detergents.
- Permanently lubricated bearings.
- Quick-Lock® mounting assembly for faster, easier installation.
- Polished stainless steel sink stopper resists corrosion.
- Polished stainless steel sink flange.
- Jam-Buster® wrench included with new clipholder.
- Built-in air switch.
- Ultra Quiet II Sound Reduction System.
-
- £265.00 + VAT
|
|
|
|
|
 
|
|
This model offers you these features and benefits:
- .75 HP Dura-Drive® heavy-duty induction motor.
- Auto-Reverse Grinding System™ for trouble-free operation.
- Stainless steel shredder ring for increased grinding efficiency.
- Stainless steel rotating shredder.
- Cast stainless steel 360° swivel lugs, stainless steel grind chamber and
elements.
- Extra-large stainless steel grind chamber for extra durability.
- Overload protection.
- Upper end bell with corrosion shield, guards against caustic action of
detergents.
- Permanently lubricated bearings.
- Quick-Lock® mounting assembly for faster, easier installation.
- Batch lock cover.
- Polished stainless steel sink flange.
- Jam-Buster® wrench included to free jams.
- Standard Quiet Sound Reduction System.
-
- £238.00 + VAT
|
|
Maxmatic Micro Continuous Feed
A compact design ideal for one and half bowl sinks. The Micro is very easy to fit with it's patented bayonet mounting system.
| |
 |
Features:
- Continuous Feed
- High Grade 3 mm Stainless Steel Ring Shredding System
- Snap Lock Mounting
- High Torque 1/3 Hp Induction Motor
- Optional Extended and Brass Sink Bushes
- 1 Year Replacement Guarantee
-
- £90.00 + VAT
|
|
Maxmatic 1000 Continuous Feed
Ideal for the smaller household. | |
 |
Features:
- Continuous Feed
- High Grade 3 mm Stainless Steel Ring Shredding System
- Patented "Clip Lock" Mounting
- High Torque 1/2 Hp Induction Motor
- Optional Extended and Brass Sink Bushes
- 2 Year Parts Guarantee
- 2 Year Labour Guarantee
-
- £138.00 + VAT
|
|
Maxmatic 1500 Continuous Feed
Ideal for the smaller household the 1500 is fitted with reverse feature. | |
 |
Features:
- Continuous Feed
- High Grade 3 mm Stainless Steel Ring Shredding System
- Patented "Clip Lock" Mounting
- High Torque 1/2 Hp Induction Motor
- Optional Extended and Brass Sink Bushes
- Reverse Facility
- 2 Year Parts Guarantee
- 2 Year Labour Guarantee
-
- £189.15 + VAT
|
|
Maxmatic 2000 Continuous Feed
A mid range continuous feed domestic waste disposal unit, with stainless steel cutting ring system and a 3/4 horse high power motor.
| |
|
Features:
- Continuous Feed
- High Grade 3 mm Stainless Steel Ring Shredding System
- High Torque 3/4 HP Induction Motor
- Optional Extended and Brass Sink Bushes
- Reverse Facility
- 2 Year Parts Guarantee
- 2 Year Labour Guarantee
-
- £253.00 + VAT
|
|
Maxmatic 3000 Batch Feed
A mid range batch feed domestic waste disposal units, with stainless steel cutting ring system and a 3/4 horse high power motor.
| |
|
Features:
- Batch Feed With Magnitop Plug System
- Massive 1.7Lt Chamber
- High Grade 3 mm Stainless Steel Ring Shredding System
- High Torque 3/4 HP Induction Motor
- Low RPM For Quiet Operation
- Optional Extended and Brass Sink Bushes
- Reverse Facility For Extended Life
- 2 Year In Home Parts Guarantee
- 2 Year In Home Labour Guarantee
-
- £305.00 + VAT
|
|
Maxmatic 4000 Continuous Feed
The ultimate in continuous feed domestic waste disposal units, supplied complete with Magnitube.
With an industrial grade cast Fe/Cr grinding system and a 3/4 horsepower motor.
That's why it carries a manufacturers
10 Year Guarantee! |
 |
Cast Stainless Steel Grinding System
|
Features:
- Complete with Magnitube
- Industrial Grade Cast Stainless Steel Grinding System
- High Torque 3/4 HP Induction Motor
- Optional Extended and Brass Sink Bushes
- Reverse Facility
- 10 Year Parts Guarantee
- 2 Year Labour Guarantee
-
- £346.00 + VAT
|
|
Maxmatic 5000 Batch Feed
The ultimate in domestic waste disposal units, the first with Batch feed and Continuous feed operation.
With an industrial grade cast Fe/Cr grinding system and a 3/4 horsepower motor.
That's why it carries a manufacturers 10 Year Guarantee! |
 |
Cast Stainless Steel Grinding System
|
Features:
- Batch Feed With Magnitop Plug System
- Continuous Feed With Magnitube
- Industrial Grade Cast Stainless Steel Grinding System
- High Torque 3/4 HP Induction Motor
- Optional Extended and Brass Sink Bushes
- Reverse Facility
- 10 Year Parts Guarantee
- 2 Year Labour Guarantee
-
- £378.00 + VAT
|
The cost of installation is not included in the price of the Waste Disposal Units.
|
